Quality Metal Roofing Built for Decades of Protection
A metal roof outlasts asphalt shingles by decades, delivering 40 to 70+ years of weather protection with virtually zero maintenance. Lifetime Construction Builders installs standing seam, corrugated, R-panel, and exposed fastener metal roofing systems for residential and commercial properties across Arkansas and Michigan.
Every metal roof panel we install is backed by our Lifetime Warranty, $1 million in general liability insurance, and $2 million in workers compensation coverage. Whether you need a full metal roof replacement or want to upgrade from aging asphalt shingles, our licensed installers handle every step from initial assessment through final inspection.
Metal roofing materials reflect solar radiant heat, which can lower energy costs by 10 to 25% compared to dark asphalt shingles. Metal roof panels are also 100% recyclable at end of life, making them an environmentally responsible, long-lasting roofing solution for homeowners seeking durability, energy efficiency, and sustainability in a single installation.
Types of Metal Roofing Systems
The range of metal roofing panels available today means there is a durable, long-lasting roofing solution for virtually every architectural style and budget. Each metal panel type delivers distinct advantages in weather resistance, aesthetics, and structural performance.
Standing Seam Metal Roofing
The premium residential metal roofing profile. Sleek vertical ribs with concealed fastener clips create clean sight lines and eliminate exposed penetration points. Available in single lock and double lock configurations, standing seam metal roofing panels combine maximum wind resistance with a modern aesthetic. Panels are mechanically seamed or snap-locked on-site for a waterproof, low maintenance finish that lasts 50+ years.
Corrugated Metal Roof Panels
Classic wave-pattern corrugated steel delivers proven weather protection at a price point that competes directly with architectural shingles. Made from galvanized steel or galvalume-coated substrate, corrugated metal roof panels perform exceptionally well in high-wind regions. We install corrugated metal roofing on residential homes, barns, and agricultural structures throughout Arkansas and Michigan.
R-Panel (PBR) Metal Roofing
R-panel features raised rib profiles that provide structural strength and fast installation. These metal roof panels are made from 26-gauge or 29-gauge galvanized steel and serve both roof cladding and wall siding applications. R-panel is one of the most versatile, cost-effective metal roofing and siding systems available for residential and commercial properties.
Exposed Fastener Systems
Exposed fastener metal roofing uses screws driven through the metal panel face directly into the structural purlins below. These steel panels offer lower material costs and simpler workability for projects where budget efficiency is the priority. We use high-quality neoprene-washer screws that maintain their waterproof seal for decades, ensuring long-term weather protection.
Why Metal Roofing Outperforms Other Materials
A metal roof is not just a replacement for what failed — it is a measurable upgrade in every category that matters to homeowners planning their next roofing project.
- Longevity — 40 to 70+ year lifespan compared to 15 to 30 years for standard asphalt shingles
- Wind Resistance — Standing seam configurations rated up to 140+ MPH for high winds and severe storms
- Energy Efficiency — Reflective metal roof sheets lower energy costs by reducing solar heat transfer
- Sustainability — Metal roof panels are 100% recyclable. Most contain 25 to 95% recycled content.
- Durability — Class A fire rating, hail resistance, zero vulnerability to pest or mold damage
- Low Maintenance — No annual sealing, recoating, or granule loss. Metal holds its finish warranty for decades.
- Versatility — Available as standing seam profiles, corrugated, R-panel, and metal tile to match any style
- Weather Protection — Handles extreme heat, heavy snow loads, lake-effect ice, and high humidity
If your current roof requires frequent repair work, a metal roofing system ends the cycle of patching and re-patching that costs homeowners thousands over the life of an asphalt roof.
Atlas Preferred Contractor
Lifetime Construction Builders is an Atlas Preferred Contractor and Atlas Pinnacle Pristine Authorized Installer — factory-trained in both metal and asphalt roofing systems to deliver manufacturer-specified installation quality on every project.
Licensed in 2 States
Arkansas — License #RR0540591024
Michigan — License #252400088
Every project backed by $1M general liability insurance and $2M workers compensation coverage. 5% Military Discount available.
Our Metal Roofing Installation Process
Your metal roof project moves through five documented stages — each one verified before we proceed to the next.
Initial Assessment & Measurement
We inspect the existing roof, decking, and structural supports to determine the full scope of work. This includes checking for hidden rot, measuring metal panel dimensions, and documenting the current ventilation profile. If we discover deteriorated flashings or compromised sheathing, you will know before any material is ordered.
Material Selection & Engineering
We help you choose between standing seam metal roofing panels, corrugated steel, R-panel, or exposed fastener systems based on your home’s architecture, regional climate exposure, and budget. Every metal panel type comes in a range of metal roof finishes — from natural galvalume to factory-applied PVDF coatings that resist fade and corrosion for decades.
Complete Tear-Off & Deck Preparation
We prefer a complete tear-off to expose the substrate and verify its structural integrity. Removing old roofing materials eliminates trapped moisture that accelerates rust and corrosion on the underside of new metal panels. Once the decking is clean and solid, we install synthetic underlayment and ice-and-water shield at eaves, valleys, and penetrations.
Panel Installation & Fastening
Standing seam profiles use concealed fastener clips that accommodate thermal expansion — metal moves with temperature changes, and the clip system allows that movement without loosening or buckling. R-panel and corrugated metal roof systems use exposed fastener patterns with neoprene-washer screws to create a waterproof seal at each penetration point. Every panel is aligned, measured, and fastened to manufacturer specifications.
Final Inspection & Cleanup
Every ridge cap, drip edge, gutter apron, and valley flashing receives a final check for proper overlap and sealant coverage. We remove all debris, run a magnet sweep to collect loose fasteners, and walk you through the completed installation before final sign-off.
Common Questions About Metal Roofing
What is the life expectancy of a metal roof?
40 to 70+ years, depending on the material and installation quality. Standing seam and galvalume systems routinely last 50 to 70 years with minimal maintenance, while corrugated and R-panel roofs typically deliver 40 to 60 years of service. By comparison, architectural asphalt shingles average 15 to 30 years before needing replacement. A single metal roof can outlast two or three asphalt installations.
Is a metal roof cheaper than shingles?
It depends on the panel type and your timeframe. Corrugated and R-panel metal roofs cost $4 to $7 per square foot installed — comparable to architectural asphalt shingles. Standing seam systems run $10 to $24 per square foot. Over a 50-year period, metal typically costs less because you avoid two or three full shingle replacements plus tear-off and disposal fees.
What is the biggest problem with metal roofs?
Poor installation — not the metal itself. Most metal roof failures trace back to improper fastener placement, insufficient underlayment, or misaligned panels. Common concerns like noise, denting, and thermal expansion each have proven solutions: solid sheathing eliminates rain noise, thicker gauge panels resist hail, and properly spaced clip systems accommodate thermal movement.
Does a metal roof lower your insurance?
Yes, most insurers offer premium discounts of 5% to 35% on dwelling coverage for homes with metal roofing. Class 4 impact-rated metal panels qualify for the largest discounts, particularly in hail-prone regions. Some homeowners save enough on premiums over the roof’s lifespan to offset a significant portion of the installation cost.
What signs indicate I need a full replacement instead of a repair?
Widespread rust, multiple active leaks, or severe storm damage typically indicate a replacement is more cost-effective than ongoing repairs. If corrosion has spread across large sections, fasteners are failing system-wide, or the decking is compromised, a full replacement protects your home better than patching.
Do you remove the existing roof before installing metal?
Yes, we prefer a complete tear-off in most cases. Removing the old layer allows us to inspect the wood decking for hidden rot or structural damage. A complete tear-off eliminates trapped moisture that can accelerate corrosion on the underside of new metal panels — ensuring the best installation quality and longest service life.
What types of metal roofing do you install?
Standing seam, corrugated, R-panel, and exposed fastener systems. Standing seam panels feature concealed clips for modern residential applications. Corrugated panels offer a classic aesthetic at a lower cost. R-panel provides excellent durability for both residential and commercial structures. We also install galvalume and Galvalume Plus coated panels for corrosion resistance.
Are you licensed and insured for metal roofing work?
Yes — licensed in two states with full insurance coverage. We hold active contractor licenses in Arkansas (#RR0540591024) and Michigan (#252400088). Every project is backed by $1 million in general liability insurance and $2 million in workers compensation coverage, protecting both your property and our crew throughout the installation.
Ready for a Roof That Lasts a Lifetime?
Get a free metal roofing estimate backed by $1M insurance, verified licenses in Arkansas and Michigan, and a Lifetime Warranty on every installation. We also offer insurance claim assistance at no cost and a 5% Military Discount.
Explore Our Other Roofing Services
Premium stone coated steel panels from DECRA, TILCOR, and Boral Steel that replicate tile, shake, or shingle aesthetics on a steel substrate.
TPO, EPDM, and metal roofing systems for commercial buildings. Flat roof and low-slope specialists across our service area.
Emergency and scheduled roof repair for metal, asphalt, and commercial roofing systems. Licensed in Arkansas and Michigan.